Tag: knock sensor
Knock Indication Duration SETUP – KSC3
The KSC3 indicates engine knock visually and electrically using a 0-5v signal. The knock indication duration in the KSC3 can
“Test” Function – KSC3 Knock Sensor ECU
The KSC3 engine knock detection system contains a “Test” function inside it’s Android app.
Knock Sensor Signal, Gain Setting – KSC3
The KSC3 knock sensor ECU has a knock sensor “Signal Gain” setting where the user can choose between “Std” (Standard)
RPM vs Engine Knock – RPM Setup on KSC3
The KSC3 knock sensor ECU uses RPM to enable a variable engine knock threshold. This article shows how to set
Fine Tune Ignition Timing with Knock Sensor Signal
To fine tune ignition timing, life can be made much easier if we have a live knock signal sent to
DIY Audio Knock Sensor – How To
It is possible to listen engine knock by connecting a 3.5mm headphone jack to a knock sensor and running it
KSC3 – Using the 0-5v Signal with an Engine ECU
When the KSC3 detects engine knock it can output a three-level 0-5v signal to an engine ECU. The engine ECU
1.8T Knock Sensor ECU – Install & Setup
In this video we install the KSC3 standalone knock sensor ECU onto a VAG 1.8T engine
KSC3 – Reading the LED (without engine ECU connected)
The KSC3 knock detection ECU can be run in two basic formats. One where we have both the LED and
Knock Sensor Signal – Threshold Setup with KSC2
This article details how to setup the knock sensor signal threshold in the MoviChip Knock Sensor Controller (KSC2)