Intercooler Spray Manager (ISM) – Intercooler Water Spray Controller

255

Out of stock

Automate your intercooler water sprayer for better cooling and less refilling.

–THIS PRODUCT IS CURRENTLY OUT OF PRODUCTION–

Subscribe to the newsletter for updates on this product

ISM – What it does

The Intercooler Spray Manager lets you decide when you spray water onto the intercooler (eg when intercooler outlet temp is above X temp and RPM is above 4000). Any 0-5v source can be used as an input.

The Intercooler Water Spray Manager also lets you choose two spray duty cycles, Stage 1 & Stage 2. Stage 1 is for normal driving, Stage 2 for bigger engine loads. For example you could set Stage 1 to spray water for 0.5 seconds every 30 seconds and Stage 2 to spray for 1 second every 15 seconds.

By controlling when and for how long water is sprayed onto the intercooler, the effectiveness of the spray can be maximised and water can be made to last longer.

You choose your settings and the ISM runs in the background, the only thing you need to do is to refill the water.

Specs

Inputs

2 x 0-5 Volt  – Analog (eg MAP, MAF, TPS, Temp)

1 x RPM Signal. Signal must alternate between 0 volts and 5-15 volts. eg smart coil signal.

Important: Read here to understand what type of RPM signal the ISM requires

Outputs

1 x 12-15 Volt (Battery voltage) – Solenoid, 5 amp MAX

1 x 12-15 Volt (Battery voltage) – Water Pump, 5 amp MAX. Note: If you need more than 5 amp capacity use this signal to power an external relay (not included)

Features

Duty Cycle

-Dual stage & 3D user programmable duty cycles

-Set “low” duty cycle for normal conditions/driving

-Set “higher” duty cycle for higher temperatures/qualifying

Duty Cycle Programming

Set “on time” from 0-1.5 seconds in half second steps

Set “off time” from 3-120 seconds

Examples

“Low” duty cycle: On time 0.5 second, off time 100 seconds, when MAP sensor over 50% and RPM over 3000RPM.

“High” duty cycle: On time 1 second, off time 20 seconds, when MAP sensor goes above 50% and RPM goes over 3000RPM (Low duty cycle/Stage 1 thresholds) and TPS is over 80%.

Benefits

Better cooling because we are not saturating the surface of the intercooler

Make water last longer because, again, we are not saturating the surface of the intercooler

No distraction for the driver, the unit controls the spraying process completely automatically. The tank just need to be refilled.

FAQ

Does It Include The Pump, Jets, Hoses etc?

No. The MoviChip Intercooler Spray Manager is an ECU designed to enhance the capability of intercooler spray kits which are already on the market and use 12v signal to trigger the pumps.

Here is a guide for making your own, high quality, DIY intercooler water sprayer


How Is It Programmed?

Using the MoviChip ISM Android App you program the unit wirelessly.

Once you have found the best settings for you, close the app and the ISM will work in the background every time you drive the car, spraying the intercooler at the times and conditions you have chosen in the app.


What Is Included With The MoviChip Intercooler Water Spray Controller

-Android App (downloaded from the website)
-ISM control unit
-Connector & crimp terminals for the ISM unit (see photos) so you can make your own loom.


What Else Do I Need?

-An intercooler sprayer kit.
-Electrical accessories, connectors, cables and tools to wire the ISM into your car’s wiring loom, water pump and solenoids.
-Good knowledge of vehicle electrical systems


Where is the Manual?

Download the user manual from the “Manual” tab on the product page.


Intercooler Water Spray Controller – Installation

You don’t need to run any wires into the cabin, the ISM unit is mounted in the engine bay and the settings are altered wirelessly via Bluetooth and an Android equipped smartphone. This also removes the need to fit devices inside the cabin like buttons, and throttle position switches. The MoviChip ISM massively simplifies the installation of intercooler water sprayer kit and does not need any holes or mounts to be put on the dashboard


General Information

How to order

Shipping

Get our news in your inbox

Got a question?


Delivery Time

Typically delivery time is between 2 & 6 weeks depending on where you are in the world.

Order online & we will reply with the delivery time.

If you are happy with the quoted delivery time, we will send you a payment request with PayPal.

PayPal: Select “PayPal” as the payment method at the checkout.

Post Office: We send our products with post office to try and avoid our customers having to pay excess charges to customs brokers. However we can’t guarantee that your product will enter your country without taxes and tariffs but we will do what we can at our end.


General Information

How to order

Shipping

Get our news in your inbox

Got a question?


ISM Manual

Download the Intercooler Spray Manager manual here

ISM Manual v17

ISM_manual


General Information

How to order

Shipping

Get our news in your inbox

Got a question?


ISM App

Download the Intercooler Spray Manager (ISM) app here. Note, the app can only work when connected to the ISM control unit.

ISM EVO 17

ISM_EVO_12


General Information

How to order

Shipping

Get our news in your inbox

Got a question?


ISM Videos

These videos show how the ISM works and detail the features of the product. If you have any questions, send us a message.


General Information

How to order

Shipping

Get our news in your inbox

Got a question?